Specs
Laminate Specifications
|
PROPERTY |
TEST METHOD PART 2 |
PROPERTY OR ATTRIBUTES |
UNITS |
TEST REQUIREMENTS |
TEST |
|
Thickness |
4 |
Maximum variation |
mm |
+0.10 |
+0.04 |
|
Warping |
5 |
Maximum warp |
mm |
120 |
0.15 |
|
Resistance to surface wear |
6 |
Wear resistance |
Revs(min) IP FP |
>150 >350 |
200 600 |
|
Resistance to immersion in boiling water |
7 |
Mass increase thickness appearance |
%[max] %[max] Rating |
10 12 4 |
5.46 4.11 5 |
|
Resistance to dry heat |
8 |
Appearance other finish |
Rating |
4 |
4 |
|
Dimensional stability at elevated temperatures |
9 |
Dimensional change |
%CM %M |
1.05 -0.55 |
0.70 0.30 |
|
Resistance to impact by small diameter ball |
11 |
Spring face |
M(min) |
>20 |
>20 |
|
Resistance to cracking |
13 |
Susceptibility |
Rating(not less than) |
4 |
5 |
|
Resistance to scratching |
14 |
Load |
n(min) |
>2.0 |
7.0 |
|
Resistance to staining |
15 |
Appearance Group 1 & 2 Group 3 & 4 |
Rating(not less than) |
5
|
5.5
|
|
Resistance to colour change in xenon arc light |
16 |
Wool standard |
min |
6 |
>6 |
|
Resistance to cigarette burns |
18 |
Appearance |
Rating(not less than) |
Brand A 3 Brand B 3 Brand C 3 |
3 4 4 |
|
Resistance to steam |
24 |
Appearance |
Rating((not less than) |
3 |
5 |
Grades
General and fire retardant [FR]
Types
Standard, post forming, compact, cabinet liner, backer
Sizes
2440 mm * 1220 mm[8’*4’]
3050mm * 1220mm[10’ * 4’]
Thickness
SUMO – 1.50mm
SIGNET – 1.00mm, [Other thickness available on request]
Surface finishes
HG - High Glass
DM – Deutch Matt
SD – Texture
SN – Stone
WD – Woody
SM - Slik Matt
VL - Vertika
HL - Horizontal
CR - Crystal
ST – Serra
LR – Lumera
Product conformity
British European standard – BS EN 438, American NEMA LD – 3, FIRA England, BS EN-476 part 7, Warrington Research UK, IS -2046 BIS (Bureau of Indian Standards)
Care & maintenance
Cleaning should be carried out with a soft moist cloth and warm soap solution. Do not use detergents containing abrasive particles or excess soda. Care & maintenance instructions do not apply to the range of metallic patterns (6000 & 7000) series as they are very sensitive.
Note
Samples presented are indicative of colour, pattern and surface finish but not the actual thickness. All metallic patterns (6000 & 7000) series are recommended for vertical applications only. Information and samples for special cabinet liners, phenolic boards, special purpose compact laminates and post forming laminates are available on request. Phone / fax /email for larger samples of your choice.
